Call Toll Free: 877.307.4499
www.techorium.com

Call Toll Free
877.307.4499

Home :: Extender Solutions :: Video Extenders :: VGA Extender :: VGA and RS232 Remote Receiver via CAT5

larger image

VGA and RS232 Remote Receiver via CAT5

$205.00USD $194.75USD
Save: 5%

Add to Cart:

Video Input	4, 8, 16, 32 female 15-pin HD connectors
Video Output	2, 4, 8, 12, 16 female 15-pin HD connectors
Audio Input	Eight 3.5mm stereo audio jacks.
	Impedance: 10k Ohm.
	Maximum Input Level: 1 Vrms or 2.5Vp-p.
Audio Output	Two 3.5mm stereo audio jacks.
	Drives 8-Ohm speakers.
	Unbalanced Gain: user defined.
	Frequency Response: 20 Hz to 20 kHz, +/-0.5 dB.
	Total Harmonic Distortion + Noise: 0.01% at 1kHz.
	Gain Adjustment: -20 dB to +10 dB in 2 dB steps.
	200 mW RMS of continuous power per output.
	When switching ports, audio mutes until video has been synchronized.
Impedance	75 Ohms
Max Resolution	1920x1200 with no degradation
Bandwidth	200 Mhz, fully loaded
Power Adapter	120 or 220 VAC at 50 or 60 Hz via AC Adapter
Power Consumption	5W, 10W, 15W, 20W, 25W or 30Wdepending on model
Cables	Interface cables between the computers and the switch are required for proper operation.
	Recommended NTI cables: VGA interface cable (VEXT-xx-MM) VGA to BNC cable (VINT)
	Cables not included
Regulatory Approvals	CE, FCC, RoHS
Warranty	Two years
Environmental
Operating Temperature	32?F to 100?F (0?C to 38?C)
Storage Temperature	-20?F to 140?F (-30?C to 60?C)
Humidity	17 to 90% non-condensing RH

There are currently no product reviews.
NOTE: Reviews may require prior approval before they will be displayed

Video Input	4, 8, 16, 32 female 15-pin HD connectors
Video Output	2, 4, 8, 12, 16 female 15-pin HD connectors
Audio Input	Eight 3.5mm stereo audio jacks.
	Impedance: 10k Ohm.
	Maximum Input Level: 1 Vrms or 2.5Vp-p.
Audio Output	Two 3.5mm stereo audio jacks.
	Drives 8-Ohm speakers.
	Unbalanced Gain: user defined.
	Frequency Response: 20 Hz to 20 kHz, +/-0.5 dB.
	Total Harmonic Distortion + Noise: 0.01% at 1kHz.
	Gain Adjustment: -20 dB to +10 dB in 2 dB steps.
	200 mW RMS of continuous power per output.
	When switching ports, audio mutes until video has been synchronized.
Impedance	75 Ohms
Max Resolution	1920x1200 with no degradation
Bandwidth	200 Mhz, fully loaded
Power Adapter	120 or 220 VAC at 50 or 60 Hz via AC Adapter
Power Consumption	5W, 10W, 15W, 20W, 25W or 30Wdepending on model
Cables	Interface cables between the computers and the switch are required for proper operation.
	Recommended NTI cables: VGA interface cable (VEXT-xx-MM) VGA to BNC cable (VINT)
	Cables not included
Regulatory Approvals	CE, FCC, RoHS
Warranty	Two years
Environmental
Operating Temperature	32?F to 100?F (0?C to 38?C)
Storage Temperature	-20?F to 140?F (-30?C to 60?C)
Humidity	17 to 90% non-condensing RH